Nitobond EP

Epoxy resin –based concrete bounding agent used for bounding new with then old cementitious surfaces.

• More time : Enables to place the concrete up to 6 hours after applying Nitobond EP without the risk of delamination.
• High bond strength : Bond strength is more than the tensile strength of good quality concrete.
• Barrier coat: Acts as a barrier coat to the migration of chloride ions from host concrete.

Used for bounding new cementitious materials to existing cementitious surfaces. For use on vertical and be supported by formwork.

• 2.4-3.0 m2/liter depending on the surface

• 0.5, 1 and 4 liter packs

The entire contents of hardener should be poured into the resin container .two materials should mixed thoroughly until uniform color is obtained.